Products
Glass Cement
Wiper
| Coming Soon... |
1. TECHNICAL DATA SHEET¢Ù:
Note£º
¢ÙAll data above ware tested under standardized condition.
¢ÚAll data listed in the chart were for rhe generalized item in the series; please refer to the related datasheet for special items.
¢ÛStorage condition has a direct impact to the products’ shelf life, Please refer to the instruction for special items’ storing.
2. DESCRIPTION:
PU-858 is one component high quality multi-purpose polyurethane sealant, it cures by reaction with atmospheric moisture to form a durable and weathering resistant elastomer, PU-858 is manufactured in accordance with the ISO/TS 16949:2002.
3. USES:
Suitable for bus, oversize windshield and side glass installing.
Suitables for adhesion between windshield/ side glass and the main part of cars, buses and special vehicles.
4. ClEANING:
Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.
5. PACKAGING:
£ª310ml cartridge, 20 pcs/carton
£ª600ml/400ml sausage, 20 pcs/carton
6. APPLICATION:
Minimum application temperature: 5ºC.
PU-858 should be dispensed from either the cartridge or sausage by means of a caulking gun. Pierce the membrane at the top of the cartridge and screw on the nozzle. Cut nozzle to give the required angle and bead size. Place the cartridge in an applicator gun and squeeze the trigger. For sausages, a barrel gun is required, clip the end of the sausage and place in barrel gun. Screw end cap and nozzle on to barrel gun. Using the trigger extrude the sealant, to stop depress using the catch plate. Apply PU-858 in a continuous bead using enough pressure to properly apply the sealant.
7. ADVANTAGES:
£ªOne-component formulation, excellent smooth appearance.
£ªModest Hardness and high tensile strength after curing .-
£ªHigh viscosity, no falling for heavy glass initial bonding.
£ªFlexible, durable and excellent extrudability.
£ªNeed no primer to glass
£ªNo sagging, no pollution and corrosion to base material and environment.
£ªExcellent sealing and adhesion performance, excellent water and aging resistance.
8. ADVICE:
£ªFor common occasion, after cleaning out the surface with organic solvent, this product can be used directly.
£ªPlease construct by application instructions strictly, failure of stickiness may be caused by any operation disobeying construction techniques.
£ªThis product is innocuous after curing completely, but before set, please avoids contacting with eyes and skin. In case of eyes and skin contact, wash immediately and thoroughly with soap and water. See doctor immediately if it is serious.
9. PRIMING:
Activators and/or primers is not required.
| Testing Items¢Ú | Performance |
| Appearance | Black, homogeneous paste |
| Density (g/cm³) | 1.35±0.05 |
| Sagging properties(mm) | 0 |
| Shore A hardness(A°) | 63±3 |
| Tensile strength( Mpa) | ≥6±0.5 |
| Elongation at break (%) | ≥400 |
| Volatile content (%) | ≤4 |
| Tensile-shear strength(MPa) | ≥3.5 |
| Open time (min) | ≤8 |
| Touch Dry time (min) | 10¡«30 |
| Curing speed(mm/d) | 3-5 |
| Extrudability (ml/min) | ≥80 |
| Pollution | Non |
| Application temperature (ºC) | +5¡«+35 |
| Shelf life(month) ¢Û | 9 |
¢ÙAll data above ware tested under standardized condition.
¢ÚAll data listed in the chart were for rhe generalized item in the series; please refer to the related datasheet for special items.
¢ÛStorage condition has a direct impact to the products’ shelf life, Please refer to the instruction for special items’ storing.
2. DESCRIPTION:
PU-858 is one component high quality multi-purpose polyurethane sealant, it cures by reaction with atmospheric moisture to form a durable and weathering resistant elastomer, PU-858 is manufactured in accordance with the ISO/TS 16949:2002.
3. USES:
Suitable for bus, oversize windshield and side glass installing.
Suitables for adhesion between windshield/ side glass and the main part of cars, buses and special vehicles.
4. ClEANING:
Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.
5. PACKAGING:
£ª310ml cartridge, 20 pcs/carton
£ª600ml/400ml sausage, 20 pcs/carton
6. APPLICATION:
Minimum application temperature: 5ºC.
PU-858 should be dispensed from either the cartridge or sausage by means of a caulking gun. Pierce the membrane at the top of the cartridge and screw on the nozzle. Cut nozzle to give the required angle and bead size. Place the cartridge in an applicator gun and squeeze the trigger. For sausages, a barrel gun is required, clip the end of the sausage and place in barrel gun. Screw end cap and nozzle on to barrel gun. Using the trigger extrude the sealant, to stop depress using the catch plate. Apply PU-858 in a continuous bead using enough pressure to properly apply the sealant.
7. ADVANTAGES:
£ªOne-component formulation, excellent smooth appearance.
£ªModest Hardness and high tensile strength after curing .-
£ªHigh viscosity, no falling for heavy glass initial bonding.
£ªFlexible, durable and excellent extrudability.
£ªNeed no primer to glass
£ªNo sagging, no pollution and corrosion to base material and environment.
£ªExcellent sealing and adhesion performance, excellent water and aging resistance.
8. ADVICE:
£ªFor common occasion, after cleaning out the surface with organic solvent, this product can be used directly.
£ªPlease construct by application instructions strictly, failure of stickiness may be caused by any operation disobeying construction techniques.
£ªThis product is innocuous after curing completely, but before set, please avoids contacting with eyes and skin. In case of eyes and skin contact, wash immediately and thoroughly with soap and water. See doctor immediately if it is serious.
9. PRIMING:
Activators and/or primers is not required.